
Property Value
WLAN modules
Protection against theft Theft protection is available as an option
Temperature sensor Temperature monitoring and software-controlled actions
possible
Environmental requirements:
Storage temperature -40 °C to +85 °C
Operating temperature -20 °C to +65 °C
Relative atmospheric humidity 10 % to 100 %
Available interfaces:
Serial interface V.24 Permanently installed, supports Baud rates: 1200, 2400,
4800, 9600, 19200, 38400, 57600, 115200 Baud
Ethernet IEEE 802.3 LAN Permanently installed (twisted pair only), 10/100 mbps,
autosensing, MDI/MDIX 2x 10/100 Base T/TX
Relay An alarm using relay is possible in the event of overtem-
perature or error: potential-free working contact, 42 V AC
1 A / 30 V DC 2 A
Optical interface Module slot for optical interface 100 mbps LWL Single
Mode LC or LWL Multimode LC - 1x 100 Base FX/SX
with SFP module
Available sockets:
Serial interface V.24 9-pin Sub-D connector
Relay switching contact N/O 42 V AC 1 A / 30 V DC 2 A potential-free, software con-
figurable, switchable
Ethernet interface RJ45 socket
Antennas:
Antenna connection RTNC socket
Transmit Power (WLAN) max. 100 mW (20 dBm) EIRP
Receiver sensitivity 5 GHz 802.11a/h:
6 Mbit/s -88 dBm;9 Mbit/s -87 dBm; 12 Mbit/s -86 dBm;
18 Mbit/s -84 dBm; 24 Mbit/s -82 dBm; 36 Mbit/s -78
dBm; 48 Mbit/s -74 dBm; 54 Mbit/s -73 dBm;
2,4 GHz 802.11b/g:
1 Mbit/s -91 dBm; 2 Mbit/s -90 dBm; 5.5 Mbit/s -89 dBm;
11 Mbit/s -88 dBm; 6 Mbit/s -90 dBm;9 Mbit/s -89 dBm;
12 Mbit/s -88 dBm; 18 Mbit/s -86 dBm; 24 Mbit/s -83
dBm; 36 Mbit/s -80 dBm; 48 Mbit/s -76 dBm; 54 Mbit/s -
74 dBm
Funkwerk Enterprise Communications GmbH
6 Technical data
bintec WLAN and Industrial WLAN 37
Comentarios a estos manuales